SEA FROST BAIT FREEZER

The Sea Frost Bait Freezers (BF series) are 110 or 220 volt A.C. powered compressor systems capable of maintaining an insulated cabinet at freezing temperatures when operating from a continuous power source.  BF units are available with ducted air cooling, or air and water cooling.  Both the remote mounted compressor and condenser are housed in a compact, rust-proof, fiberglass housing.  The system is connected via copper lines to the boat's insulated cabinet fitted with our 1/2" thick stainless steel direct evaporator plates or with a hidden coil (if the installation is new construction).  The temperature is controlled with a digital, low-voltage thermostat. 

Custom Stainless Steel Plates

Bait Freezer plates are a polished stainless steel, direct evaporator design.  The typical freezer installation requires two plates.  Plates are 1/2" thick with sealed backs and are available in custom sizes with stainless steel or copper refrigerant tubes.

 

End View BF 2 & BF 3

Front View BF 2  & BF 3

 

Available Models

  BF 1 BF 2 BF 3
A.C. amp draw 4 at 110 volts 6 at 110 volts 6 at 110 volts
Horsepower 1/4 1/4 3/8
Height 16" 16" 16"
Width 14.5" 14.5" 14.5"
Depth 7.5" 7.5" 7.5"
Cooling

Ducted Air

Air and Water (remote water pump required) Air and Water (remote water pump required)
Condensing unit weight 36 lbs 42 lbs 42 lbs

 

Seafrost Baitfreezer Pricing

  BF 1 BF 2 BF 3
BF Condensing Unit  (115-volt)

1095.00

1245.00

1295.00

BF Condensing Unit  (220-volt)

1195.00

1345.00

1395.00

       
ETC Digital Thermostat

105.00

105.00

105.00

       

Line sets and jumpers are available in any length.

5' Liquid Line with Drier, CPV & QC Fittings 171.60 171.60 171.60
10' Liquid Line with Drier, CPV & QC Fittings 186.60 186.60 186.60
15' Liquid Line with Drier, CPV & QC Fittings 201.60 201.60 201.60
20' Liquid Line with Drier, CPV & QC Fittings 216.60 216.60 216.60
       
5' Suction Line with QC Fittings 84.60 84.60 84.60
10' Suction Line with QC Fittings 99.60 99.60 99.60
15' Suction Line with QC Fittings 114.60 114.60 114.60
20' Suction Line with QC Fittings 129.60 129.60 129.60
       
Plate Jumper line with QC fittings (for systems using two plates)  67.60 67.60 67.60
       
LSA38F Line set adaptor 
(3/8" copper tubing with access ports and QC fittings. Required to connect a new condensing unit to an older system.)   

30.00

30.00

30.00

LSA14M Line set adaptor
(1/4" copper tubing with access port and QC fittings. Required to connect a new condensing unit to an older system.)   

30.00

30.00

30.00

       

Call for a quote on evaporator plates.

 

Replacement parts 

Bullet Drier 

12.00

12.00

12.00

Constant Pressure Valve

75.00

75.00

75.00

BF Fan  110-volt 

130.00

130.00

130.00

BF Fan  220-volt

140.00

140.00

140.00

Compressor (replacement) 295.00 295.00 325.00
BB Relay & Transformer Box 115.00 115.00 115.00
Aeroquip QC Fitting Female -06 (3/8) 17.50 17.50 17.50
Aeroquip QC Fitting Female -06 (1/4)  17.50 17.50 17.50
Aeroquip QC Fitting Male -06 (3/8)  17.50 17.50 17.50
Aeroquip QC Fitting Male -06 (1/4) 17.50 17.50 17.50
       

SEA FROST, 372 Route 4, Barrington, NH 03825 USA
Tel: (603) 868-5720 ~ Fax: (603) 868-1040
1-800-435-6708 (USA, Canada & Caribbean)
e-mail: sales@seafrost.com