This is an example of a narrow box without much space on either side of the plates.
In this situation the tubing can exit
at the top of the plates. A minimum of 3 1/2" above the top of
the plates is required for tubing bends and the valve.
To order a system, the following information is require:
Plate dimensions and orientation. Both standard and custom plates available.
Location of valve on plate.
The distance between the two plates for the length of the connecting jumper line.
Liquid line length. (Distance between valve on the first plate in the series and the compressor.)
Suction line length. (Distance
between the second plate in the series and the compressor.)